Convert DS2152 / DS2154 Demo Kit-Converting

Abstract: This applicaTIon note provides the instrucTIon to convert the Dallas Semiconductor / Maxim DS2152 / DS2154 T1 / E1 demo kits.

The DS2152DK & DS2154DK are ordered and shipped for either T1 or E1 operaTIon. However, the kits are easily converted to the other mode.

To convert from DS2152DK to DS2154DK: T1 → Place DS2154 in locaTIon marked U1. Place 2.048 MHz oscillator in location marked X1. Remove and replace Rr. Cut trace and place Rt, see note 3 below.

To convert from DS2154DK to DS2152DK: E1 → Place DS2152 in location marked U1. Place 1.544 MHz oscillator in location marked X1. Remove and replace Rr. Remove Rt and solder wire in place. The table below details the required components.

Component Description T1 E1
U1 SCT DS2152 DS2154
X1 OSCILLATOR¹ 1.544 MHz 2.049 MHz
R25 & R26 Rt 0Ω², ³ 9,2Ω²
R33 & R34 Rr 50Ω 37.5Ω for 75 Ohm Termination
60Ω for 120 Ohm Termination
Notes: Recommended oscillators: NTH039A-1.544000 & NTH039A-2.04800.

Saronix
151 Laura Lane
Palo Alto, CA 94303
Phone: (415) 856-6900
Fax: (415) 856-4732
http: //

The DS2152DK and DS2154DK are both shipped with a 1: 1.15 transformer (PE-65388) in the transmit path.Some of the configurations in the data sheets specify a 1: 1.36 transformer, PE-64937 is a 1: 1.36 transformer available from Pulse Engineering.

Pulse Engineering
PO Box 12236
San Diego, CA 92112
Phone: (619) 674-8100
Fax: (619) 674-8262
http: //

The DS2152DK is shipped without R25 & R26, the kit is configured with Rt = 0Ω by shorting the path on the printed circuit board. In order to place resistors, Rt ≠ 0, the traces must be cut. The locations to cut can be found by turning the PCB over and locating the trace that connects the through holes at either end of the R25 & R26 resistors. Carefully cut them with an X-acto knife, and solder the resistors in place on the top side of the PCB.


  • [Compact Design & Family-Sized:]Compact design frees valuable desk space while non-slip grip keeps it from being knocked off. 6 high powered ports lets you charge any combination of phones, tablets or other USB-charged devices simultaneously

  • [Guaranteed Safety]Overcharging, overheating and short circuit protection. CE,FCC & RoHS certified design, industry grade materials and premium circuitry ensure superior performance and reliability

  • Brand Name: OEM

    Product Name: Multi USB Charger

    Use: Mobile Phone

    Place of Origin: Guangdong, China (Mainland)

    Port: 6 port

    Input: AC100-240V 50/60HZ

    Size: 90*70*16mm

    Weight: 250g

    Materials: PC+ABS

    Color: Black/White

    Warranty: 1 year


Multi Usb Charger

Multi USB Charger,Multi Usb Wall Charger,Multiple Usb Port Charger,Multi Port USB Charger

Shenzhen Waweis Technology Co., Ltd. , https://www.waweis.com