For the average user, Brush is not easy to encounter, but it is still necessary for brush enthusiasts and the need to repair machine users under special circumstances.
Qingmang box firmware download: http://pan.baidu.com/s/1nub6qXr
Password: 2g37
What needs to be added is:
1, Qingmang model: USB cable first inserted into the computer USB port, find the needle to insert the reset hole and then put the other USB plug into the Qingmang USB port.
2. Smart Box & Mango Ice: Plug one end of the USB cable into the USB port on the computer first, and then insert the reset pin into the reset hole. Then insert the other end of the USB port into the USB port on the Tsingtao Port. Then press the Power button.
Zhizhi I official brush tool is here, other links on this page are: http://pan.baidu.com/s/1o7iF5XK
5. When the power is turned on, the machine will reboot and enter the main menu. At this time, we brush machine to complete.
Qingmang box firmware download: http://pan.baidu.com/s/1nub6qXr
Password: 2g37
What needs to be added is:
1, Qingmang model: USB cable first inserted into the computer USB port, find the needle to insert the reset hole and then put the other USB plug into the Qingmang USB port.
2. Smart Box & Mango Ice: Plug one end of the USB cable into the USB port on the computer first, and then insert the reset pin into the reset hole. Then insert the other end of the USB port into the USB port on the Tsingtao Port. Then press the Power button.
Zhizhi I official brush tool is here, other links on this page are: http://pan.baidu.com/s/1o7iF5XK
The new S805 program from Messertu, Brush Method, can be referred to the following tutorial:
Ready to work:
First of all, we need a dual-headed USB; connect one end to a computer and the other end to a suitable location to facilitate the use of a flashing machine;
Download and install the Brush tool;
Brush tool download address: http://pan.baidu.com/s/1o6Jp8mu
Please do not use the computer with the 360 ​​installed brush machine tools, 360 will block the brush machine driver, resulting in brush machine tools can not be used normally.
After the installation is complete, replace the license file in the installation directory with the following file (a file connected to Baidu disk: http://pan.baidu.com/s/1c04aR8s).
Note: After downloading the modified directory file, replace the license file in the compressed file package with the license in the installation directory.
The address of the installation directory is: My Computer: CundefinedrogramFiles AmlogicUSB_Burning_Tool
After completing the above steps, restart the Brush Tool to use the Brush Tool normally.
Perform brushing:
After downloading the corresponding Brush Pack, open the Brush Tool and select "File - Import Burn Package" to import the Brush File into the Brush Tool.
Use a toothpick and other items to hold down the reset hole on the bottom of our machine (be careful not to loosen it) and connect the USB cable to the USB port of the machine near the network port. About 3-6 seconds later, when the Brush Tool prompts us to link successfully, we can release the toothpick.
When the Brush Tool Prompt connection is successful, you can click the "Start" button, then the firmware will be burned.
When the recording is successful, the USB cable is pulled out and powered on to allow our system to install the application. It takes about 5-7 minutes to install. Please wait patiently.
5. When the power is turned on, the machine will reboot and enter the main menu. At this time, we brush machine to complete.
smart touch screen whiteboard for meeting room and classroom,smart interactive whiteboard for conference video system and teaching;
smart board,smart interactive flat panel,smart touch screen interactive,smart interactive whiteboard
Jumei Video(Shenzhen)Co.,Ltd , https://www.jmsxdisplay.com