TCL F3800A installs third-party software through U disk

The TCL F3800A installs a sofa housekeeper through a U disk. Other models of the TCL F3800A can also refer to this tutorial.

Installation process 1 Download the installation file, put it in the U disk/SD card specified folder → 2 Restore with software Open the installation file → 3 Installation is successful

Steps

Step 2: Create a new file in U disk or SD. Name TVManager. In this file, create a sub file named backup. Put the sofa housekeeper apk in the backup. (If you use the existing SD card of the TV, you can directly find the backup folder. ).

Step 3: Find a TV Guardian or TV Steward, open up and you will find there is a software manager.


Step 4: Click on Software Management to enter “Software Recovery”.

Step 5: Find the sofa butler, click "Install" or "Resume", after a few seconds will prompt the installation is complete and then exit, you can find the just installed sofa housekeeper in the "Application" page or "All Applications".

Some models because the sofa butler will be installed on the U disk or SD card, unplug the U disk or SD card, the sofa butler will disappear, just plug it back into the TV to normal use. Or you can transfer the sofa butler to the TV memory via the TV Guard's transfer function.

Note for installing butler:
1. If you are using the sofa butler to download the application, you will be prompted to “Prohibit the installation of unknown sources”. Please click “Settings” in the tool box of the sofa butler to start the automatic installation.
If you are unable to install the application after confirming that the automatic installation is enabled, use the method of installing the sofa butler to install the two settings "appointer" and "installer" apk.
Click to download: "Settings" and "Installer" download links"
2. Finally, please open the settings to allow installation of unknown sources.

(The two software should not be installed on the sd card. It must be installed on the TV. After successfully installing the “settings” software, some of the features in the setup software will be directly exited, but it will not affect the use.)

If you still can not read the U disk, it is recommended to format the U disk to FAT32 format (if there are other contents in the U disk, export and then format), or try another U disk.

Coreless Motor product introduction:

Coreless Motor, small size, light weight (cylinder) - radial rotation/weeks to rotation (flat) - low noise, low power consumption, strong sense of vibration - simple structure - reliability - response time short Micro Vibration Motor is mainly used in mobile phones, toys, adult health supplies, etc

Function:  fast speed, suitable for aircraft model, electric toothbrush,USB fan and other products.

Characteristic: the volume is 6MM 7MM fast.

Features: small size, fast speed, dc high speed motor starting voltage 0.6v is not possible for other motors.Wear shaking head, strong vibration feeling.

Operating temperature range:

Coreless Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a Coreless Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

Coreless Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

The longevity of Coreless Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant  with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department  to service to you Looking forward to your inquiry. Welcome to our factory.

Coreless Motor

Coreless Motor,Micro Coreless Motor,7Mm Coreless Motor,Micro 6Mm Coreless Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com