Foreword: "Neon (Lightbox) Advertising Engineering Technical Regulations" is designed to adapt to the development of the growing neon (lightbox) advertising, to standardize technical procedures and ensure the quality of the project. This regulation has been organized by Zhongnihui to organize relevant technical and technical personnel according to the relevant technical standards that have been issued in China, and combined with the long-term installation engineering practice of the industry, extensively solicit opinions from experts from all major provinces and cities in the country as well as relevant technical and quality supervision departments. After repeated revisions and after being reviewed and approved by the Second Committee of the Second China National Committee, it was approved by the China Advertising Association as an industry standard. In the trial process, if defects are found, please send your comments and relevant information. Neon Secretariat, for future reference. The formulation of this procedure is based on:
1. GB50259-96 Electrical installation engineering, electrical lighting installation and acceptance specifications
2, TB1/104-94 neon installation standard
3, DB31/101-92 neon transformer
4, DB31/100-92 neon lights
5, DB11/074-1997 neon installation specification
6. DB32/176-1997 Neon installation specification Main drafters of this regulation: Chen Yuanguan, Wen Bo'an, Yu Yuming, Zhao Yuanqing, Yang Qi and Neon (lightbox) Advertising Engineering Technical Regulations (Trial) (ND/T105-1998)
1. General
1.0.1 In order to adapt to the development of neon (lightbox) advertising, standardize technical regulations, ensure project quality, and maintain social benefits, specially formulated neon (lightbox) advertising engineering technical regulations (hereinafter referred to as procedures).
1.0.2 This procedure applies to the design, fabrication, installation and acceptance of indoor and outdoor neon lights (light boxes).
1.0.3 The design, production, installation and acceptance of neon lights (light boxes) shall, in addition to complying with the provisions of these Regulations, comply with the Advertising Law of the People's Republic of China and the relevant standards promulgated by the current state, industry and region. Specification and regulations.
1.0.4 Neon lights (light boxes) design, construction drawings, electrical circuit diagrams should comply with the design principles and installation process requirements specified in the "Procedures".
1.0.5 The main materials used in neon lights (light boxes) and the quality of electrical products should comply with the current standards.
1.0.6 Outdoor large neon (light box) iron frame structure should be designed or approved by the architectural design department.
1.0.7 Neon lights (light boxes) construction safety, labor protection, fire prevention, should be implemented in accordance with current national regulations.
1 2 3 4 Next Page
Guangzhou Yunge Tianhong Electronic Technology Co., Ltd , https://www.e-cigarettesfactory.com