Playing games on the big screen is definitely a very refreshing thing. However, considering the high prices of various consoles and above games, or directly playing the game on the computer, here's a common and simplest and most stable TV. The computer connection method can enjoy the pleasure of playing computer games on a large screen.
Example using equipment: K50J, HD cable (HDMI cable), computer sample TV system: 5.0 System network environment: No need for networking
Remarks: There may be cool powder do not know HD line length sample, to a HD cable close-up, pay attention to the interface.
Specific connection steps:
The first step: Turn on the TV and computer and get ready for the high definition (HDMI) cable;
Step 2: Plug one end of the HD cable into the HDMI connector on your computer. The interface and thread head are exactly matched;
Step 3: Insert the other end of the HD cable into the HDMI connector on the back of the TV. There will usually be two HDMI interfaces, whichever you choose;
Step 4: Switch the signal source through the remote control and switch the signal source to the HDMI port where the HD cable is inserted.
Note: Xiao Bian's computer is somewhat old and the interface is loose, so no signal is detected. So be sure to plug in the plug.
After detecting the signal, you can see the screen of the computer screen already on the TV.
Since the resolution of the TV is not the same as the resolution of the computer, it is difficult to ensure that both are full screen. Of course, it may also be the reason for Xiaobian's computer. I tried to adjust the screen resolution of the computer. There were several resolutions that could not detect the signal after the modification. There are signals: 1366768 and 1280600. The former is a computer full-screen TV incomplete screen, and the latter is a full-screen computer screen incomplete, really tangled.
When connecting, you can adjust the resolution of your computer to see if you can keep your computer and your TV full screen. If you do, please remember to leave a message and tell me!
Common questions
Q: After plugging in the HDMI cable, switching the source prompts no signal?
A: Check if the HDMI cable plugged into the computer and TV is loose. Before plugging in the cable, you can clean the HDMI jack. Impurities such as dust can also affect the signal.
Q: Why can't the full screen be connected after the computer TV is connected?
A: The general computer will automatically recognize the resolution of the display device. When the resolution of the monitor does not match the output resolution of the computer, the monitor cannot be full-screen (black, top, bottom, left, or right), or one side (horizontal or vertical) and the monitor are full, and the other (vertical or horizontal) is beyond the screen. You can adjust the resolution of your computer at this time.
Q: Why does the HDMI cable connect to the laptop with a lot of noise?
A: One may be because the HDMI cable itself is not of good quality, resulting in noise. At this time, you can choose to change the HDMI cable. Second, if the cable is no problem, you can turn off your computer and TV. If you can no longer post to the community for help.
This content is copyrighted exclusively by SofaNet. Welcome manufacturers to further exchanges and cooperation with us to create more in-depth product reports.
Sofa Net is an Internet technology company specializing in smart TVs and boxes. It owns popular products such as sofa butlers, sofa tables, and sofa forums. It has been committed to providing high quality application resources for smart TV and TV box users and active community exchanges. And authoritative evaluation of smart TV products.
Example using equipment: K50J, HD cable (HDMI cable), computer sample TV system: 5.0 System network environment: No need for networking
Remarks: There may be cool powder do not know HD line length sample, to a HD cable close-up, pay attention to the interface.
Specific connection steps:
The first step: Turn on the TV and computer and get ready for the high definition (HDMI) cable;
Step 2: Plug one end of the HD cable into the HDMI connector on your computer. The interface and thread head are exactly matched;
Step 3: Insert the other end of the HD cable into the HDMI connector on the back of the TV. There will usually be two HDMI interfaces, whichever you choose;
Step 4: Switch the signal source through the remote control and switch the signal source to the HDMI port where the HD cable is inserted.
Note: Xiao Bian's computer is somewhat old and the interface is loose, so no signal is detected. So be sure to plug in the plug.
After detecting the signal, you can see the screen of the computer screen already on the TV.
Since the resolution of the TV is not the same as the resolution of the computer, it is difficult to ensure that both are full screen. Of course, it may also be the reason for Xiaobian's computer. I tried to adjust the screen resolution of the computer. There were several resolutions that could not detect the signal after the modification. There are signals: 1366768 and 1280600. The former is a computer full-screen TV incomplete screen, and the latter is a full-screen computer screen incomplete, really tangled.
When connecting, you can adjust the resolution of your computer to see if you can keep your computer and your TV full screen. If you do, please remember to leave a message and tell me!
Common questions
Q: After plugging in the HDMI cable, switching the source prompts no signal?
A: Check if the HDMI cable plugged into the computer and TV is loose. Before plugging in the cable, you can clean the HDMI jack. Impurities such as dust can also affect the signal.
Q: Why can't the full screen be connected after the computer TV is connected?
A: The general computer will automatically recognize the resolution of the display device. When the resolution of the monitor does not match the output resolution of the computer, the monitor cannot be full-screen (black, top, bottom, left, or right), or one side (horizontal or vertical) and the monitor are full, and the other (vertical or horizontal) is beyond the screen. You can adjust the resolution of your computer at this time.
Q: Why does the HDMI cable connect to the laptop with a lot of noise?
A: One may be because the HDMI cable itself is not of good quality, resulting in noise. At this time, you can choose to change the HDMI cable. Second, if the cable is no problem, you can turn off your computer and TV. If you can no longer post to the community for help.
This content is copyrighted exclusively by SofaNet. Welcome manufacturers to further exchanges and cooperation with us to create more in-depth product reports.
Welcome to use the sofa butler as your first choice. The smart TV application market sofa butler is full of software content, updated quickly, but also comes with a lot of smart TV optimization gadgets, can make your smart TV box does not get stuck, software, games will always remain the most Fresh is the perfect steward of a smart TV box.
Sofa Net is an Internet technology company specializing in smart TVs and boxes. It owns popular products such as sofa butlers, sofa tables, and sofa forums. It has been committed to providing high quality application resources for smart TV and TV box users and active community exchanges. And authoritative evaluation of smart TV products.